Bull Carbon Fiber Shaft – 3/8×11 Joint Insert

Bull Carbon Fiber Shaft with 3/8×11 Joint Insert

Want carbon on a cue you already own? This Bull Carbon fiber shaft comes with a 3/8×11 joint insert installed. $494.99.

Which cues take a {short} shaft?

The 3/8×11 joint is less common than 3/8×10. Southwest cues use it, and some Cuetec models use it too.

Don’t substitute 3/8×10

Because 3/8×10 is far more common, people sometimes order it for a 3/8×11 cue. The pins are the same diameter but the thread pitch differs, so the shaft won’t seat properly. If you own a Southwest, this is almost certainly your joint. For other cues, confirm with the maker or bring the cue to us. If it turns out to be 3/8×10, use our 3/8×10 Bull Carbon shaft.

Build and specs

Behind the removable insert, this is the standard Bull Carbon shaft: 1 mm carbon fiber walls, a 16-inch pro taper and a Kamui Black soft tip seated on a white Juma tip pad. It ships at 29 inches and 12.25 mm. Bull also makes it at 30 inches and in 11.75 mm; call before you order if you need one of those. The 10-year Bull Carbon warranty covers warping and defects.

Bull Carbon 3/8×11 Shaft Specifications

Bull Carbon 3/8×11 Shaft FAQ

Which cues use a 3/8×11 joint?

Southwest cues, and some Cuetec models.

Is 3/8×11 the same as 3/8×10?

No. Same pin diameter, different thread count.

What’s the shaft length?

29 inches standard. A 30-inch shaft is available by phone.

How much is the Bull Carbon 3/8×11 shaft?

$494.99 at Billiards Direct.